Jung 1225SDE Standard Dimmer Socket

• Jung, the perfect solution for your installation.
• Switch programme.

Jung 1225SDEStandard dimmer Standard dimmer Inductive transformers minimum 85% nominal load with lamps. Total load must not exceed 500 VA including transformer losses. Memory function integrated Electronic over-temperature protection Performance additives: Item number: 246 EB: maximum 10; Load must be "split" between dimmer and power boost. Connection of extension ("extension combination" possible): Extension insert "2-wire", item no.: 1220 NE Same functionality with short-stroke button (item no. ..1561.07 ..) as the standard dimmer. Number of extension units: Unlimited Total cable length: maximum 100 metres Mechanical push button (NO, not illuminated) Short operation: On/Off Long press: Dimming Number of extension units: Unlimited Total cable length: maximum 100 metres Note: Extension operation is only possible if a "insert" is attached to the main body. Illuminated mechanical push-buttons must have a separate N-terminal. Storing of a brightness value (memory function) is not possible with mechanical probes (closers). Extension insert "3-wire", item no.: 1223 NE used with automatic switch item no.: ..1180 .., .. ..1180-1, ..1280 .., .. ..1280-1, Presence detector item no .: PMU 360 .. or ceiling automatic observer item no: DAW 360 .. On the main site also an automatic switch, occupancy sensor or ceiling-automatic observer must be used. Otherwise, no function is given. Number of extension units: maximum 10 Total cable length: maximum 100 metres Covers: Short-stroke button: .. 1561.07. Universal short-stroke button: .. 1561.07 U .. Short stroke button with radio receiver: .. 1561.07 F .. Short stroke button with radio receiver and LED function display: .. 1561.07 F KO .. Automatic switch standard, 1.10 metres: .. 1180. Universal automatic switch, 1.10 metres: .. 1180-1 Automatic switch standard, 2.20 metres: AS .. 1280. Universal automatic switch, 2.20 metres: AS .. 1280-1 Ceiling automatic observer: DAW 360 .. Presence detector Universal: PMU 360 .. Depending on the type of installation, the maximum power consumption can be reduced: - 10% for every 5 ° C above an ambient temperature of 25 ° C - 15% for installation in wood, plasterboard or hollow wall - 20% for installation in multiple combinations Specifications Nominal voltage: AC 230 V ~, 50/60 Hz Connected load: 20 500 VA Dimming principle: Phase angle Load types: 230-V bulbs 230 V halogen lamps Dimmable inductive transformers Mixed loads of the specified load types. Backup, type: T 2 AH 250 Volts Connection: Screw terminals maximum clampable wire cross section: 2 x 2.5 mm2 or 1 x 4 mm2 Specifications