- x SUPER GLUE GEL 2GM, Extra strong.
- x Fast but temporarily adjustable, Does not drip, Ideal for porous materials and vertical surfaces,Dishwasher proof and water resistant.
- x SUPER GLUE LIQUID 3GM, Ultra fast and strong super glue.
- * Flows into smallest corners and joints.
- * High quality adhesive glue, Safe and comfortable to use.
1.SUPER GLUE GEL: Dripfree and temporarily adjustable super glue
SUITABLE FOR:Ideal for smallarea bonds. Glues almost all solid
and flexible materials like ceramics, leather, rubber, many
plastics such as rigid PVC, ABS, PS, Plexiglas, polycarbonate
Makrolon, and phenolic resins Bakelite, porcelain, metal, wood,
cork, felt, and cloth check suitability first. Only partly
suitable for glass over a certain period of time the bond becomes
brittle, causing it to weaken. Ideal for porous materials.
Preliminary surface : Any dust, oil, grease, wax or
separating agent should be thoroughly removed from the surfaces
to be stuck together. The best way to achieve this is to rub the
parts a number of times with appropriate solvents, such as
acetone if suitable for the material check first. For metals and
metal alloys it is usually sufficient to roughen the surface
using emery paper or by grinding or brushing. Directions for use:
1. To pierce the membrane, turn the cap clockwise firmly onto the
tube. Tip: do not press the tube while piercing. 2. Unscrew the
cap to reveal the applicator. Apply the adhesive directly from
the tube, using the nozzle, as thinly as possible onto one side
too much glue slows down the curing process significantly. Press
parts together immediately. After use, clean nozzle with a dry
tissue and replace cap. Advice: When glueing at low humidity,
curing time can be shortened by briefly breathing onto one of the
parts to be assembled. The best glueing results are reached at
room temperature. Points of attention: Contains cyanoacrylate.
Bonds skin and eyelids together in seconds. If product comes into
contact with the eyes, rinse immediately with plenty of water and
seek medical advice. In case of contact with skin, glue can be
dissolved by soaking in warm soapy water. Then apply a skin
cream. May cause respiratory . Avoid breathing vapours.
Keep out of the reach of children. Storage conditions: Store in a
dry, cool, frostfree place. Storage below +5 DEGREEC in
refrigerator ensures maximum shelf life. 2. SUPER GLUE
LIQUID:Ultra fast and strong super glue SUITABLE FOR:Ideal for
smallarea bonds. Glues almost all solid and flexible materials
like many plastics such as rigid PVC, ABS, PS, Plexiglas,
polycarbonate Makrolon, and phenolic resins Bakelite, porcelain,
ceramics, leather, metal, wood, cork, felt, cloth check
suitability first, and rubber. Only partly suitable for glass
over a certain period of time the bond becomes brittle, causing
it to weaken. BEFORE USE: Working conditionsDo not use at
temperatures below +10 DEGREEC. The glue responds best to an air
humidity level of 5070%. Surface requirementsSurfaces to be glued
must be clean, dry, and free of dust and grease, and must fit
exactly. Preliminary surface Any dust, oil, grease, wax
or separating agent should be thoroughly removed from the
surfaces to be stuck together. The best way to achieve this is to
rub the parts a number of times with appropriate solvents, such
as acetone if suitable for the material check first. For metals
and metal alloys it is usually sufficient to roughen the surface
using emery paper or by grinding or brushing. Directions for
use:1. To pierce the membrane, turn the cap clockwise firmly onto
the tube. Tip: do not press the tube while piercing. 2. Unscrew
the cap to reveal the applicator. Apply the adhesive directly
from the tube, using the nozzle, as thinly as possible onto one
side too much glue slows down the curing process significantly.
Press parts together immediately. After use, clean nozzle with a
dry tissue and replace cap. Advice:When glueing at low humidity,
curing time can be shortened by briefly breathing onto one of the
parts to be assembled. The best glueing results are reached at
room temperature. Points of attention:Contains cyanoacrylate.
Bonds skin and eyelids together in seconds. If product comes into
contact with the eyes, rinse immediately with plenty of water and
seek medical advice. In case of contact with skin, glue can be
dissolved by soaking in warm soapy water. Then apply a skin
cream. May cause respiratory . Avoid breathing vapours.
Keep out of the reach of children Storage conditions:Store in a
dry, cool, frostfree place. Storage below +5 DEGREEC in
refrigerator ensures maximum shelf life